0 Cookie Img

Fractional Mud Pump Stroke Counter

Fractional Mud Pump Stroke Counter
Fractional Mud Pump Stroke Counter
Product Code : 04
Product Description

MSC-001 'Scorpion' - Fractional Mud Pump Stroke Counter


Part Number: MSC-00X

 

Highly accurate counter for mud pumps.

Measures the end points and FRACTIONAL STROKES in between as an absolute 4...20mA signal.

 

This allows for smooth flow measurement reading especially at low frequency.

 

Spring loaded arm follows movement of the pushrod

 

4...20 mA 2 wire current loop output

Zone 0 Ex ia IIC Certified

 

Patent Pending

 

  IECEx 


Technical DataConnection Options
Operating temp:- 20 ...+   60 degrees CCable (available as wireless or with connector as well)
-   4 ...+ 140 degrees F+LoopRed (+Current)
Certification:ATEX, IECEx, CSA-LoopBlack (-Current)
Weight:6.6 lbs (3.0 kg)
Protection:IP 66 / X7 MOutput
Material Sensor:Stainless Steel

To calibrate the unit, mount counter at the beginning of the stroke movement instead of the end like a micro-switch.  The pushrod will then push the arm outwards.  At the outermost point set the 'HIGH' point, as the pushrod moves back, the spring mechanism brings the arm back in.  At the innermost points set the 'LOW' point.  You can now measure the two end points consistently, and also all points in between. 

 

  

Material Spring:Stainless Steel
Material Arm:Stainless Steel
Material Bracket:Stainless Steel
Resolution:0.18mA = 1 degree
  
Mounting of Pivot Arms
We provide several screw hole locations
for user to mount pivot arms to make contact
with the pushrod:

 2x 12-24 imperial holes 1.5" apart

 2x 1/4"-20 imperial holes 1" apart

 2x M6 metric holes 20mm apart

 

 

Advantages

 - Detects speeds under 1 Hz - Wireless signal can be integrated with ATEX and IECEx
 - Detects normal fast speeds as usual - Various outputs possible with wireless version, including
 - Measures down to tiny fractions of a stroke   mimicking 'micro-switch' type output
 - Measurement is absolute 4...20mA - Mounts in same place as micro-switch type devices,
 - Fully quadruple certified   anywhere in the box/coffin area
  
Certification
IP 66 and Ex ia IIC T4
ATEX  [Certificate]

IECEx  [Certificate]

CSA  [Certificate]

GOST (CU) [Certificate]


Installation:

Hohner can provide a magnetic base that can easily be attached and removed from any mud-pump for quick installation for specific jobs.  We use two 400lbs strong magnets with an on/off toggle to prevent the assembly from shearing off due to the stroke forces.

 

Dimensions

Contact Us

504, Ghanshyam Enclave, Lalji Pada, Kandivali Link Road, Kandivali (west),, Mumbai, Maharashtra, 400067, India
Phone :91-22-62365513/66999132